Subscribe
A Step In The Right Direction

Stair Tread Loose Miter Returns ( Size: 1-3/8 x 12 in. )

Stair Tread Loose Miter Returns ( Size: 1-3/8 x 12 in. )



Stair Tread Loose Miter Returns ( Size: 1-3/8 x 12 in. )

Clear

Description

We stock and custom manufacture a wide selection of square edge miter return stair treads in many hardwood types. Our standard hardwood stair treads are 1-1/16 in. ( thick ) x 10-1/2 in. ( wide ), and come in lengths of: 36 in., 42 in., 48 in., 54 in., 60 in., and 72 inches.

Note: we can make oversized stair treads to meet your specific job site needs. So, if you need hardwood stair treads that are wider and/or longer than the above mentioned sizes, simply email us your request!

Understanding Which Side Of The Stair Tread Is Mitered:

The biggest rule of thumb is to always view the staircase looking from the bottom up. So if your handrail is on the right hand side (looking from the landing or first stair tread up the staircase) then have a right hand open staircase. Thus, you need right miter stair treads!

Understanding The Sizing Of Single Miter Return Stair Treads:

It is very important to know that a installed miter return takes 1-1/2 inches away from the total length of the stair tread. A proper installed miter return is done by 45 degree cutting the stair treads front side edge that is needed to have the installed miter ( thus, the front bullnose itself is 100% untouched ). For Example: the fitting size of a 42 inch miter return tread is actually 40-1/2 inches. This means that if you want the tread to fit a opening of 41 inches or longer then you will have to buy a 48 inch miter return tread and then simply cut it down to the proper fitting size.

Understanding Our Single Miter Return Stair Tread Product Codes:

Single miter treads will either have a left miter return end installed or a right miter return end installed. The left hand miter stair treads are indicated by having the ‘LM’ in their product codes listed below. The right hand miter stair treads are indicated by having the ‘RM’ in their product codes listed below. Note: the left hand miter return stair treads are listed first in the below product list.

Q: When Do You Need Double Miter Return Stair Treads ?

A: You need double miter return installed on your stair treads when your staircase has a handrail system running up both sides of the stairs.

Understanding The Sizing Of Double Miter Return Stair Treads:

The best way for sizing a double miter return stair tread is to give the stair company the true inside measurement. This is the size between the two installed miter return ends. What this means is that if you want the tread to fit a opening of 47 inches then you will have to buy a 54 inch tread and have it cut down 50 inches and then have each miter end installed. Thus the total tread size is 50 inches, as the tread loses 1-1/2 inches per installed miter end. You can order double miter return stair treads based on the total length… but note that if you order 48 inch double miter return stair treads, they will have a true inside fitting size of 45 inches.

Latest Installs

 

Company Location:

2579 Sackville Drive
Upper Sackville NS B4E 3C3
Canada

P: (902) 252-1716
Toll Free: 1-866-770-1716

 

 

Proudly Made in Canada